Pfister Faucet Installation – The Ultimate Guide

Although different pfister faucet models come with the same components, many iconic models provide unique features. Also, the installation process can slightly vary for different models. If you’re about to dive into a pfister faucet installation, having the right tools and proper knowledge is a must.

In this article, we’ll guide you on how to install a pfister bathroom faucet. If you’re confident enough to install it yourself, wholly read this article. You can also ask for professional assistance instead for maximum satisfaction.

Pfister Faucet Installation: Step by Step

Step 1: Remove the Existing One

Firstly, you have to turn off the water supply of the old faucet. Make the area clean after completely removing the old faucet. After that, it’s time to install the new faucet output. Put the spout on the countertop through the central hole.

Now, the spacer flange and the nut should be put onto the spout’s tailpiece underneath the sink. Tighten up the mounting nut for securing the spout using pliers. Straighten the spout to its desired position before tightening completely.

Step 2: Install Faucet Valve

In the countertop, the valve should be pushed up from beneath the sink to the two outer holes. You’ll find an O ring in the spout’s shaft which will help the valve to be sealed against the spout. Now, thread the nut that holds the shaft and the valve body together after pushing it all the way to its ideal position.

Make sure that the cold and hot sides remain straight in the center of the sinkhole before tightening the nut using pliers or a wrench. Remember- the handles can remain slightly out if not centered properly.

Step 3: Install the Trim

When it comes to installing the trim, the plastic gaskets should be installed first from the sink top to the chrome escutcheon. Tighten the plastic nut to seal the faucet as well as to help it remain in one place. Follow the steps for both the hot and cold sites.

Step 4: Install the Handles

Now it’s time to jump into the installation of handles of your faucet. Install both the hot and the cold handles after slipping them over the steams. Try to push it all the way down. Now, tighten them up using an Allen key that came with the kit.

For accessing the Allen key slot, turning the valve into the “on” position may be needed. Follow the same procedure further if any repairing needed in the future. The Allen key is made to be hidden that helps the faucet look sleeker.

Step 5: Connect Water Supply

Now, it’s time to connect water supply tubes to the both hot and cold sides of the faucet. Hook the tubes under the sink. Use channel-type pliers to shut the valve off. Changing the supply tubes is often recommended while installing a new faucet unless they are fairly new.

Conclusion

Hopefully, this guide has helped you master the steps of Pfister faucet installation. You are suggested to do it yourself if you’re confident enough otherwise calling a professional will be a clever idea. Watch online videos if needed.

Have more queries? Feel free to let us know in the comment section below.